Contact Zhengsheng 18,022,852,920 new Panthers waterproof Description: Good Panthers more brand new JS-II polymer cement waterproof coating to a variety of other high elastic copolymer emulsion polymer additives from deployment. You can use a certain proportion mixed with cement construction. The waterproof coating with excellent impermeability, crack resistance, durability and acid resistance. Product non-toxic, harmless, to facilitate the construction of a new generation of environmentally friendly waterproof material. Uses: mainly used for inter-day surface, exterior walls, basement, toilet and bath, kitchen, tunnels, roads, pools of water, anti-leakage, moisture engineering for aerated concrete, hollow brick masonry and other porous materials moisture seepage drain. Dry and wet base job can use: Primary treatment: The base surface should be smooth, solid, non-cellular, Ma surface, dirt, grease and other surface adhesion, yin and yang angle arc should be made before construction defect grassroots response repair, to waterproof construction requirements. For cement, concrete and cement mortar base surface must be reached before construction solidification period. Preparation and construction waterproof coating: the emulsion: cement = 1: 1 weight ratio of preparation, and the prepared paint roller coating two to three times the thickness to waterproof specifications. Brushing every time interval of about 1-2 hours (specifically be adjusted according to weather, environmental conditions, with sticky appropriate). Enhancement: waterproof layer must be increased, can be woven or fiberglass cloth as the carcass reinforcement. Emulsion dosage: 1-1.5KG / M2 Note: 325 # cement over ordinary portland cement or slag cement, prohibited the use of dry strength cement or hydraulic cement. Ingredients should be strictly in accordance with the ratio of column preparation, stir, stirring time shall not be less than five minutes, prohibiting manual agitation. Emulsion should be sealed and stored at 5-40 degrees, shelf life of 12 months. Construction temperature: 5 degrees packaging specifications 20KG / barrel